Contents
Tire pressure
The recommended tire pressure for the Dodge Intrepid varies depending on the tire size and the vehicle’s load. However, the recommended tire pressure can usually be found on a sticker located on the driver’s side door jamb or in the owner’s manual.
Bolt pattern
The bolt pattern for the Dodge Intrepid is typically 5 x 114.3 mm (5 x 4.5 inches). This means that there are five lug nuts on each wheel, and they are spaced 114.3 mm apart from each other (measured from the center of one lug nut to the center of the one opposite it).
Torque specifications on wheels
The torque specifications for the lug nuts on the Dodge Intrepid typically range from 85-100 ft-lbs. It’s important to use a torque wrench to ensure that the lug nuts are tightened to the correct specification to prevent damage to the wheel or brake components.
Dodge Intrepid LHS
2.7 i (200hp), 3.2 i (225hp), 3.5 i (236hp), 3.5 i RT (249hp)
1998, 1999 , 2000, 2001, 2002. 2003, 2004
Dodge Intrepid wheel specs and tire sizes (1998 — 2004)
- Bolt pattern (PCD): 5 × 114.3
- Center Bore (CB): 71.6
- Thread size (THD): 12 × 1.5
- Diameter: 16 — 20
- Width: 225 — 255
- Aspect ratio: 35 — 60
- Smallest — Largest tire size: 225/60R16 — 255/35R20
Dodge Intrepid rims sizes (1998 — 2004)
- Diameter: 16 — 20
- Width: 7 — 9
- Offset: 35 — 45
